Ion cleanse K609

commodity：ion cleanse K609
voltage： 110V-220V
power：60W
Fuse: 130 ℃
Protection rank: IP51
Working pattern: Continuous working
Operating condition: 15 ℃ -30 ℃
storage condition: 25 ℃-85 ℃

A.The work theory of the Ion-Cleanse
The Ion-Cleanse process is an amazing cleansing method for detoxifying your entire body by bathing your feet in warm water while using positive and negative ions from an ion generator. The process is also known as electrolysis. The array element is the actual ion generator device that sits down into the water and creates the ion charge and flow within that solution. It attaches to the power supply, which controls the array element ion flow and change.
B .The preparation before use:

1.Open the box, please take out the equipments from the packing, move the protection layer from ion cleanse and the assitance accessory
2.Please read the basic manual of ion cleanse before using.In case of you have any further questions or need more information, please contact the manufacturer and dealer.
3.Please put them in the good place. The place choice, should by the well lit, ventilate good, approaches the water source, dirty drainage opening and power source primarily.
4.choose the fit container to put your feet and array
5.fill up the lukewarm water in order to immerge the feet and array
6.please avoid the power and the controller is soaked by the water, and avoids the overflow and the liquid sprinkleing, in order to prevented get an electric shock and short-circuits.
Attention:
 
If this local water quality is soft, you could put the salt (1 gram -2 gram) which fully stirs by dissolves in order to increases the energy transmition of water.
For avoiding the liquid sprinkling the hydration overflow, who must consider that water level goes up when the user’s puts feet in the container
7th、please the controller in the dry place. Who must put it from the ground , on the one hand it is convenience operation, on the other hand it might prevent processing the controller to soak by the water.
 
C.Operation
1st、beginning, put the the power line, the ion arrayand the wrist band into machine before using. Next, put the ion array into the wash pan filled with water, and put on the wrist band. Finaly, turn on the power.
 
Entire machine connection schematic drawing


Main engine horizontal plan




2.When you turn on the power switch, the screen shown is as follows

Default time is Time=30 minutes. To adjust for more or less time, use the (+) or (-) key,. Press (ENT) button. The time operation is as follows

Time=06:28 pos+ positive polarity，pos- negative polarity
T=30 minutes time，M=3 mode three，E=1.0 current output， The instrument automatic turns off when the timer ends.
3.During initial operation, mode 3 is default. The current output is selected by choosing a different mode. The current output is as follows: Mode 1=1.6 amps, Mode 2=1.8 amps, Mode 3=2.0 amps. To select a different Mode, press (-) or (+) key. Pressing (ESC) will return to menu. Because there are differences in local water quality, it may be necessary to add a pinch of salt to the water to maintain the desired current output.
D. Attention
 
1     Do not touch power while your hand is wet, please pay attention to your personal safety.
2.     Avoid striking the machine.
3     Use clean cloth to polish the dust on the machine’s surface, do not use any chemicals.
4     Be gentle when pressing the keys to protect the machine under normal use.
5     You must prop up the machine with the handle while the machine is operating.
E. Precautions
If who has the following situation not to suit the use.
1.People who have battery operated implants (e.g.. pace makers) should never use
2.Do not soak ‘open wound
3.Pregnant women or nursing woman should never use.
4.This device is not recommended for children under 8 years
5.Anyone who has received an organ transplant should never use.
6.Who have ever received the surgical of replanting the heart
7.who have to receive the medicine or mentality treatment
8.Suffer from epileptic seizures
 
Change for the better reponse
1.Being short of vitamin and mineral due to detoxing toxin, resuming the cells and metabolism, so you will feel tire while after using ion cleanse at once. And then, we suggestion that you must make up the vitamin and minera in time.
2. if you have any feels of using it, please ask the consultation and service as soon as possible.
 
Attention
1.Please check the machine before using it. If the machine has worked out of order, the mail line or broken, on’t open the machine by yourself. All the problem must deal with by professional.
2 Please cut off the power the switch when do not use it
 
F.cleansing and maintenance
1.Use clean cloth to polish the dust on the machine’s surface, do not use any chemicals.
2.Using clear water and tap water to cleanse the array after usring. Please using the professionaly Clean fluid which you can buy from the dealers.
3. Ion array should soak after the cleaning solution 5 – 20 minutes, by clear water flushing. The cleaning solution might use several times, when you discarded the cleaning solution should consider processing the environment and the security, were sure not to fall at will.
4. ion biochemistry acts according to each place water quality the difference, may use generally 50 time. After pokes head in the life end, should replace the ion head, ion purchases to the dealer.

G. Troubleshooting
LCD screen does not illuminate:
Check On/Off power switch, power cord connection, blown fuse

The ion probe does not work:
Check the connection, Clean thoroughly, Replace the array

Pressing any key does not produce a response:
Turn off power switch for 10 seconds, and then restart.

H.Operating instructions
1. Use ordinary tap water. Do not use distilled water. All water quality is different. Only add a little salt at a time. Adding salt will promote the Ion Detoxification System to conduct electricity. The capability of conducting mainly lies in the waters conductivity quality. The capability of the conducting of the water determines the ion effects and impacts the function of detoxification. If the ampere readout is 1.5 amperes or below, add a little salt to enhance the capability of the conducting. But, for maintaining the machine life, please avoid adding salt
2. Adults need 30 minutes per section
3. 8-15 year old children must use with adult supervision for no more than 15 minutes.
4. Under 50 years, OK to use it every other day for 14 continuous treatments, then stop for three weeks before starting the 14 treatment cycle.
Over 50 years, OK to use it every three days for 14 continuous treatments, and then stop for four weeks before starting the 14 treatment cycle.Do dot use more than three days in a row. Do no use more than twice per day.
5. The array is needs to be cleaned after every use by soaking in a combination of 30 parts water and 1 part of phosphoric acid or household bleach. Soak at least 5 minutes.
 
I. Quality pledge
○ the manufacturer pledged:This manufacturer cell row of poisonous meter main engine gets up in for 2 years to Eli the elegant SPA from the purchase date to be responsible to maintain and to avoid any fitting expense (consumption to be an exception).
○ this company does not undertake the responsibility to thefollowing behavior:
. Because not when operates the harm which but creates
. Outside wrapping damaging
. Not after authorized disassemblage
. Or uses damaging of no account for the equipment value, according to or wire tarnish and so on.
. The consumables, like pokes head in, to poke head in the cleaning liquid.
○ for guarantees the use and maintenance effectiveness, please in detail reads this instruction booklet.